The answer is YES.
Wheels:
STERN ST-1 BEAST 19x9.5 +35 offset (8.5" Bead seat)
Tires:
Federal SS595 215/35/19
Modifications:
Easystreet bags in the front
Custom bag setup in the back.(Easystreet will clear, but only by a hair)
Roll and pull front fenders
Roll rear 1/4 Panels FULLY
I will be Folding over the Pinch welds around the Strut on the inside of the front wheel well, these will cut the tires.
On with the pics, Car is NASTY with sand and Pollen all over it,, but the rain hides most of it.
Front Rim lip to Fender lip:
Rear Lip to Rim Lip
Very Very Barely touching.)
For once some pics not Slammed, This is ride height:
And SLAMMED pics:
FULL Album of Images can be Found here along with a 1200x800 download:
http://www.HotModelPhotography.com/CavRims
Wow, great job getting those rims to fit. Just stay away from pot holes those could be killer!!
I really doubted these fitting, but you did it!
Awesome work dude!
yeah it looks like its going to be over if you hit anything..
otherwise looks good, not a big fan of the wheels, just not my style
awesome man...looks great!
Thanks guys, I keep getting the watch the Bumps and First pothole, What do you think will kill them. I see the obvious Pothole damage, But there's nothing to cut them on the car.
Now what do you all recommend I clean them with. This is my first set of real rims. ALready have ceramic pads, so I dont have very much of a Dust problem.
I love the look but am worried your gonna destroy those rims as the rim sticks out farther than the tire
that is freakin sweet!
amazing choice.
Needing 2.3 oil pump stuff? PM me...
AMAZING! Wheels suit the car perfect. Thats a lot of stretch- havent seen that since my VW days.
You do some great work with pics- take pics of my car (or just touch them up for me
)
_
Now with northstar V8, IRS, 20's n 22's
looks good but yea with those tires stretched that far, watch out for pot holes.
chazz.... i got some detailing products for your rims. stop by myrtle and give me a call.
Chazz with the Camera(SpyWiz) wrote:Thanks guys, I keep getting the watch the Bumps and First pothole, What do you think will kill them. I see the obvious Pothole damage, But there's nothing to cut them on the car.
Now what do you all recommend I clean them with. This is my first set of real rims. ALready have ceramic pads, so I dont have very much of a Dust problem.
Not necessarily cutting them on the car, but bending one of the rims if you hit too hard as there is not a lot of rim protection from the tire's sidewall there the rims stick out so much farther than the tire.
Looking great Chazz, glad you got them to fit!!
FOR SALE
That's how a cav should look. Great job, great look, now leave the exterior alone.
i been waiting on these pics lol
wow i love this car lol......makes me want a 3rd gen agin
how do your HDR's (sp?)
Edited 2 time(s). Last edited Wednesday, March 25, 2009 5:09 PM
The wheels deff look bad ass on the car! Props for going through the work to make them work!
2009 Ford Mustang V6
From your prior thread-
James (ROLN19S) (JuicyJ) wrote:Joe Schulte wrote:Do it big.
Prove somebody wrong. Seriously.
I see nothing wrong with that rear setup though there has to be a better solution than running a bare stock strut. I would have to look, but I think fabbing a shock mount would be possible and further the custom factor.
As for the cylinders being too fast you always have SMC slow-downs but I know that's a cover to replace them 
.
Joe - He won't prove me wrong one bit by using these wheels. He will however spend A lot of time and more money than needed just because the wheel was too wide.
Now what were you saying almost a month ago? Haha.
That look sick as hell. Honestly I'd call this car done exterior-wise. Sick and aggressive. Blower-time!
I like the rims, but i hate the stretch. Flair the rear fenders like Ecotecpower did, toss some toyo fenders on the front, and run a wider tire.
Tinkles
2003 Cavalier 1SV
Bagged and Blown
Looks great Im not a Bag man but ur J looks great.
Life is to short 4 bulls#*$.
Willpower is no match 4 horsepower!
Love your car bro! Great job! Rims look sick!
wow those rims made your car even better i love the rear shot of your car awsome
8 psi with m62 and IAT under 100
