I can't find anything with the search on how to install a side skirt. I dont have sides now, so I don't know what to drill into. I'm gonna go out and see what I can do, just wondering if there are any particular things I need to do to make it fit.

if its fiberglass and its tight make sure you shave a little down before. dont force it on it will break! i just used the factory screws at the bottom of each fender wall. some people put rivets in the door sills so they sit better and some use 3m double stick tape.

Im going to use the double stick tape in the door sills because i dont plan on moulding my sideskirts. and the screws on the fender walls.


hope that helped

I just pur screws all over the place, then I shaved the heads off, this way my sideskirts are like super secure.

If you shaved the heads off the screws...what is holding the part on? Sounds like you're gonna rattle it loose after a few hours of driving. Don't wanna rain on your party but just bringing it to your attention before you lose a sideskirt going down the road.



<img src="http://images.cardomain.com/member_images/11/web/443000-443999/443183_1_full.jpg">

well if he shave the heads off/down he may have used counter sink screws that that would be fine I'm curently in the proces of redoing my skirts just to get them looking more flush and get rid of all of the quirks about them I talk to alot of guys they say use fusor 147 its a structual adhesive that bonds to just about anything take a look at it if I get anything done this weekend I'll post some pics