Has anyone ever successfully got the 2002 Z24 front and rear valance on the 2000 Z24 bumpers?
I have acquired the valances but my bumper is different and I don't know how to go about getting them on. I want to have them molded on.
Any help would be greatly appreciated.
Thank you.
you have to cut the slots in for them , and moulding them in is alot of work
1 of the guys here in az has been working on his for a long time now
only 02 had the lips
the bumpers are pretty much the same other wise , but the 02 bumpers have the slots if they came with the lips
I cut off all the taps. the front is mounted with screws: 3 toward the middle, 1 at each fenderwell, and 1 on each side midway between center and fenderwell with a washer to keep lip up. The rear is mounted with 1 screw at each fenderwell and the rest is 3M emblem tape. I have had them on for 10-12 months and no problems.
When i took my lip off. it lookd like the dealer cut the slots in there with a dremel tool. But i was n MD n i went to look at a SRT-4 and i went over a bump and it got ripped off. But now i took it off and i put screw n the 6 holes on the lip.Looks like when i first got it.
Hi friends. You can find more info
here
I hope you find it useful.
Regards,
___________________________
MAKING MY DREAMS A REALITY
Visit my cardomain site !!!
ELIOT. Now.....boosted.
[quote=97cavie24ls(JDM cav sedan™)]only 02 had the lips
the bumpers are pretty much the same other wise , but the 02 bumpers have the slots if they came with the lips
my mom has a 2000 cav and her car has the lips w/ the slots in it.
