Iv been trying to do the high beam fog light bypass. when i popped my relay off i didnt see any black wires ... here is the wires i have. Orange is 30 Pole...Green/White is 85 Pole...Brown is 86 Pole...Purple is 87 pole. Iv looked and cant find another post with this problem. If you guys could help it would be appreciated. Something esle is

"The pole "30" has a black wire, cut this one (there are two so look carefully at the numbers on the relay). Next cut the green/white stripe wire. After this wire has been cut, tape off the end going into the large relay. Next you will need to connect the remaining three ends together (two black and one green/white stripe)"....

it says After the wire has been cut to connect the Three ends together... where do u get three ends from two wires? I mite be missing something. If this has already been posted then please send me in the right direction. I have a 05 Cavalier LS Sport


Thnx... Mike


YOU'VE GIVEN IT A SOUL. NOW TURN IT LOOSE. YOUR CAR IS AN EXTENSION OF YOUR PERSONALITY, A FINELY TUNED MACHINE, GREATER THAN A CREATION OF STEEL, RUBBER AND TORQUE. IT'S THERE TO TAKE YOU PLACES. YOU'VE GIVEN IT A SOUL THAT MOVES YOU. HOW YOU CUSTOMIZE THE OUTSIDE SPEAKS VOLUMES ABOUT WHO YOU ARE INSIDE!