If its glass, its probably going to have to be cut in half and have glass added to make it fit.
^^ so i paid $270 for this thing, hasseled with them for a week to get it, and drove to canton to get the thing...and now ill have to cut it and reglass it??? man, i hope you are wrong rob =P
FOR SALE: (5) '95-'99 Z24 Rims
Quote:
man, i hope you are wrong rob =P
So am I, but if it doesn't fit now, that might be the only option.
no, just when i slide the one side on, the other side dont go over. maybe i have to put it straight on. idk i tried that though. i was hoping mike was around. he lives near me, and has it. ill try and find him via aim or something.
FOR SALE: (5) '95-'99 Z24 Rims
Arnjolt wrote:Are you supposed to remove the stock lip?
the stock lip is part of the bumber man =P
i hope jakub and james and fix this. although i figure they wont wanna hassle with it.
FOR SALE: (5) '95-'99 Z24 Rims
ok there is a little bit of a lip on the back edge of the bumper you have to trim that off, and the lip goes up over the stock bumpers bottom lip. youll see the where its supposed to set. if need be i can come down one day this week and help put it on, but you should be able to get it on with no trouble
simple minds talk about other people.
average minds talk about events.
great minds discuss ideas
thanks, im going to work on the car right now so ill see.
FOR SALE: (5) '95-'99 Z24 Rims
thats the same thing w/ my stock rear bumper. once i get one side hook the other side is a bitch and i have to pull on it to get it on. my trd sides were like that too, they seemed too small but once i just put some effort into it, i got it to fit and it fit snug. just be patient with it and just work w/ it. it should fit
^^ yeah thanks. it should go on. the qualitly is just so horrible. ahhh.
FOR SALE: (5) '95-'99 Z24 Rims
Take the fender liner out on the one side, im betting the extra slack will allow for it to fit the other side. Dont own the lip, just noticed that from the picture.
yeh brian it needs to go over the lip of the bumper i beleive, i would try about sliding it over it instead of working side to side.. good luck with it..
Brian Anderson {1999-Z24-4spd} wrote:^^ yeah thanks. it should go on. the qualitly is just so horrible. ahhh.
i wouldn't say the quality is horrible, just because you have no experience with this sort of thing doesn't make it horrible.
i thought the same about my rksport skirts, they did not fit
i had to cut them and make them fit, it seems that is the issue with lots of kits for our cars
so don't say its trash because you cannot make it work.
T2 wrote:Brian Anderson {1999-Z24-4spd} wrote:^^ yeah thanks. it should go on. the qualitly is just so horrible. ahhh.
i wouldn't say the quality is horrible, just because you have no experience with this sort of thing doesn't make it horrible.
i thought the same about my rksport skirts, they did not fit
i had to cut them and make them fit, it seems that is the issue with lots of kits for our cars
so don't say its trash because you cannot make it work.
http://www.j-body.org/forums/read.php?f=1&i=345809&t=345809&p=2
go there and tell me the quality isnt horrible
Manta Z(The Primered One) wrote:yeh brian it needs to go over the lip of the bumper i beleive, i would try about sliding it over it instead of working side to side.. good luck with it..
yeah, you're right, and i know this....thats what it looks like at that position with both sides in place...thats what i was doing that picture for.
thanks everyone. im sure me and gramps will get it on. right now we ahve the QP off finally. we are gonna start putting the new one on. we just got some paint, and clear. its coming together. we still have to take the door apart and fix it. (btw that urethane that holds on the window and that pillar is a bitch to get off =P)
FOR SALE: (5) '95-'99 Z24 Rims
As I said in the other post, where are those pictures taken of on the lip? When I shipped the lip it was in perfect condition and I am not sure where these pictures are taken off? In addition, it looks like there was something yellow added to the lip because it was all white before shipping.
White Boy wrote:As I said in the other post, where are those pictures taken of on the lip? When I shipped the lip it was in perfect condition and I am not sure where these pictures are taken off? In addition, it looks like there was something yellow added to the lip because it was all white before shipping.
no offense, but it sounds like you're trying to make up bs.
first of all, what do you mean where are the pics taken of? either end by the wheel wells, and a side shot of the front of it. how can you not see that?
secondly, i don't know where you're seeing yellow. i've looked at those pics a couple times now and can't see any yellow what so ever on them. not sure why you're seeing anything other than just white.
^^yeah
White Boy wrote:As I said in the other post, where are those pictures taken of on the lip? When I shipped the lip it was in perfect condition and I am not sure where these pictures are taken off? In addition, it looks like there was something yellow added to the lip because it was all white before shipping.
do you have proof that it was fine before shipping? because when i got it, it was crappy. its gonna be a lot of work to get it on and looking good now. and what the hell did i have time to add on it and make it yellow? i picked it up and took it to my grandpas and thats whats there.
look at that pic for ex. its all weavy at top, and the hole has FG sticking off it.
FOR SALE: (5) '95-'99 Z24 Rims
brian, seriously if need help putting it on i am more than willing to come down and help get it on. i got mine and it seemed a little short until i trimmed the bumper a very tiny bit and it fit perfect.
simple minds talk about other people.
average minds talk about events.
great minds discuss ideas
then you dont have to worry about it, are both sides short? if so your going to have to reglass it
cant wait to see it
