I did my homework with google.ca can't seem find much good infos about how to fix the stratched carbon fibre?
Help will be appericated.
Shawn Coleman
im sanding and clear coating right now, and that seems to work pretty damn well....
ill post some pics here tomorrow of before and after
- Cameron (CaliforniaCavalier)
-
www.csc-motorsports.com
AND DONT FORGET:
if you decide to do this, you need:
800 gritt wet sandpaper
bucket of water
paper towels & windex
a few cans of clearcoat (may need more depending on how much you are doing). i used about 5 cans for my whole hood.
just wetsand (leave sandpaper soaking for a few minutes.) then sand area, windex and wipe everything down with A LOT of paper towels.....
then clean some more and start clear coating from a distance with small strokes about 8 inches away from surface...
do 5-8 coats LIGHTLY.
then polish a few times and then wax with a good machine buffer and some good wax. do this a few times also.
-Done.
- Cameron (CaliforniaCavalier)
-
www.csc-motorsports.com
