My 2.4 is cooked.
Have a possible engine 2.4 from 1996 GrandAm. Apparently will work BUT this one has a EGR valve. Need to be able to pass e-test ongoing, so I do not think this is a straight swap in.
Looking for advice on if this engine will work.

Thanks

yes it will work all you gotta do is run the 99 exhaust manifold and gasket then just ditch the EGR. you'll also need to use the 99 intake manifold as it has the EGR hole plugged.

-run the 99 fuel system
-run the 99 knock sensor (you'll need an adapter plug as the 99 bolt is smaller than the 96 bore, the specific part number is here use the search)

the 96 motors utiliize an oil level sensor in the oil pan, you're 99 does not. dis-regard, you will not need it.

its a pretty easy swap, actually.



Come join us over on the Olds Quad 4 and Twin Cam Facebook group!