I noticed a low rpm misfire/hesitation so i just changed my plugs. They look pretty normal, but cyls. 1 and 4 seem to be runnin a lil lean. Any advice?
Thanks in advance
what plugs did you put in it , what plugs did you take out ?
You could have a coil pack going bad or even some bad wires, if i remember correctly the firing on the coil packs is 3241 going from top to bottom .. but thats on a 96 with the packs on the back of the motor not the side like yours.
<img src=http://domestictuners.com/banner.jpg WIDTH="400" HEIGHT="75" /img>
Hit 200 NA it broke once, Hit 213 it broke again,
Hitting 300 NA is further away than I thought.
I took out split fires (second time i had them) and went back to ac delco's. I don't know i tried the splitfires again, cuz i remember i had the problem with them the first time around...i just can't remember exactly what it was.
My repair manual says the firing order is 1324....wait sec. thats pretty much the samething. Ok nevermind
OK, well it's not the plugs. It's still doin it, so i'm guessin it might be one of the wires goin to the ignition control module since i got the rksports tach adaptor. I guess i'll go check that out
did you gap the plugs properly?
Land Pirates sail the open roads
DISCLAIMER: If anything I say offends you, I don't care..wear a helmet. Also, the information
I post is what I know to the best of my knowledge. If I am wrong, please correct me so that
others as well as myself may learn.
Premium sinc 6-17-04
that would mean .060 and nothing else .. the cars are picky.
<img src=http://domestictuners.com/banner.jpg WIDTH="400" HEIGHT="75" /img>
Hit 200 NA it broke once, Hit 213 it broke again,
Hitting 300 NA is further away than I thought.
Rol N A Z (AKA: ImportHater) wrote:that would mean .060 and nothing else .. the cars are picky.
yeah thats the main thing i heard about the splitfires. Everyone told me to stay away from them, but me being me, wanted to see why. They were fine for me, but i'd rather stick with the ac delcos
The AC Delco's I got were pre-gapped to .060 so I'd imagine as long as you order them with your car selected they come pre-gapped? I put one on the feeler gauge and it was set right, didn't mess with anyh of the others after I saw the first one was correct. Glad those Bosch Platinum+4's are out of my car, it has sooo much more power on stock plugs and it doesn't sit there and miss and sputter like crazy.
I had +4's in my car for about a 5 days and took them out. Car just felt weird with them