hey guys i just figured i'd update yas on my rebuild i just got the head off and pistons out should be getting my crank kit this weekend
also i wanted to ask... im rebuilding this motor to be really strong what all do you guys recomend i do while its tore down.. i already plan to get a stage 3 clutch and high performance rings
00 Z-24 S/C
correct me if wrong, but is that not an r/c car body in the background?
oops!
I would recommend:
forged rods
forged pistons w/ full floating wrist pins
bore and sleeve the block
get the crank balanced, knife-edged, and cryo-treated
fully port & polish the head with SS valves and beehive valve springs
Cometic head gasket
Can't really think of anything else right now.
did u blow ur motor? or just have lots of cash
Nate
Evolution of Cavyboy-->C22t--> C24na--->c24s/c
1995 Cavalier W/2k1 Engine
GM S/C 13.940@99.78pmh w/2.068 60ft
Cracker Rocket wrote:oops!
I would recommend:
forged rods
forged pistons w/ full floating wrist pins
bore and sleeve the block
get the crank balanced, knife-edged, and cryo-treated
fully port & polish the head with SS valves and beehive valve springs
Cometic head gasket
Can't really think of anything else right now.
gonna sleeve the 2.4 huh?
And ur gonna fully built an engine for that gm supercharger???? i hope ur gonna add a big shot of Nitrious 2 cuz it seems to be a waste.
http://www.cardomain.com/id/StylezTA
wouldn't it be easier to rebuilt the motor, outside of the car?
and I'm wondering the same as above
Yeah why would you sleeve it? hehe
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
Yeah why sleeve it????
I would replace the piston's and rods (use the same as stock compression), just forged.
Paint some of the stuff to make it look nice.
A good questio was did yoou blow it?
ok to answer some questions yes i blew the motor .... well rod knocking. it already has forged pistons and rods but i want to get new pistons anyway... wiseco a good brand for these? and im dissasembling the engine in the car because the car is sitting it gravels and it would be very hard to remove an engine with a cherry picker in the gravels
also im building this motor out tha @$$ because i plan to be getting turbo kit in a little while i expect probably around 13/20 PSI boost.
00 Z-24 S/C
