ok peps i got my second car so now its time to start building my "fun" enigne
got a few ? befor i start grabing stuff outa the yard
one the wiring harnes for the 3.1 is the same as the 2.2mpfi (as in the v6 comp will plug into the fire wall i realize the harness it diff cause of the sensors)
and whare can i get a bolt in 5 speed tranny to hold a high power 3x00
will the issusu tranny hold it with a rebuild and beefing it up
thanx peps ill soon b joining the ranks of the v6 /3x00 engine swapers
also what is the fastest v6 in a j just wana know
thanx
The 2.2 harness and 3.1 harness are different. I know they used too know share the same ECM and I don't believe they did even upto 94'.
As for the tranny, there are people running the isuzu. I'd say it's ok, but I prefer the gearing of the muncie/getrag.
As for the fastest V6? Are we talking NA? Colin's 3.1/3100 hybrid runs a 13.9. My 3.1 turbo'ed runs a 12.3, and Frank (3800 turbo) runs a 11.33 I think. Frank's is a drag exclusive car, but Colin and mine are stil street driven.
Curtis
91' Turbo Z24
http://www.turboz24.com
so the ecm and harnes wont plug in
just wana make shure of what i need and for now yea na
For questions and answers to Hybrid or 3X00 swap's check out our site:
www.domesticcrew.com
Sign up to the forum for access to the info sections of the forum.
No real big modifications are needed to run a 3x00 or a hybrid setup off a 3.1L harness. But yes as Curtis has said, you will need the 3.1L harness.
Colin, 92 sunbird GT
3200 high output. Naturally Asperated.
14.391 @ 96.479, 2.134 60 foot. Street Tyres.
13.99 @ 95.22, 1.92 60 foot on Slicks.
Engineered Performance LSD equiped.
http://www.domesticcrew.com/colin/
Member of the www.turboz24.com crew.
CAN I CHANGE A SIMPLE 2.2 L AND SWAP A 3.1SFI V6 FROM A94 CORSICA TO A 92 CAVALIER
colin, you dont come here to offtin..... email me ive got some things you "MAY" be intryested in
Christopher.taetsch@usmc.mil
latter man
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
MUNCI
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
yea i know
and im thinking of swaping the z24 steering rack in as well
also does ne one know what a 2gen will run with a 3400 man
and if im not mistaken the 3400 will bolt on and work with eather the issusu or the getrag ....right
i know about that site i just havent had much time to b on the net latley
many persional problems
a bone stock 3400 - 5 speed in a Jbody should run mid to low 14's
yes, the 3400 will bolt to anything the 3.1 did.. but the external slave Muncie trans is easier to work with. i've taken mine out in about 2 hrs and had it back in and drove the car in about 3 hrs..
