Parts for sale, from a sunbird with the 2.0L non-turbo motor... if you need more details, post here, or PM me, will get back to you ASAP... need it all gone!!! thanks
FOR SALE:
TBI intake manifold with TBI and injector, vacume lines, ect.
Ignition coil pack
Camshaft
Lifters
Lash caps
Cam followers
Cylinder head with valves, valve springs, ect.
Crankshaft
Rods
Pistons (standard size)
Pistons (0.030 over)
full intake will filter and MAP sensor
Exhaust manifold
Distributor w/ cap, and wires
5 speed Trans.
ECM (Computer)
Wiring Harness (some ground and other cables are cut, will repair for extra)
Driver seat (will need reapulstered)
Fuel pump
Water pump (used but VERY lightly... maybe 10 miles on it)
Oil pump
10 disc changer (universal)
Pioneer head unit
OEM sunbird head unit
OEM casette player
Full A/C system
Need anything else? ask... i probably have it and am getting rid of it
thanks, hope to get some of this stuff gone!!!!
"Hondas are like tampons, every pussy has one!!!"
Hey im in anderson indiana i got a 94 sunbird 2.0 5speed i would be really interested in the motor if your close to me at all im lookin for one to rebuild for a class next yr and that i can use.
first off, sorry it took so long to get back to you, i have been gone the past 3 days getting one of my friends figure 8 cars ready... anyway, im not selling the motor itself, im selling parts from it, i have it torn down to do a high performance build, im selling the stuff i dont need... if theres some certaint parts you need i could probably sell them to you??
"Hondas are like tampons, every pussy has one!!!"
no theres not anything really that i need but what all are u doing to the motor? Turbo?
Alright, and it was a non-turbo TBI to stat with... im having the block put in a tumble shot oven to get surface rust off, and old paint, painting it, new freeze plugs, block decked 0.020", forged pistons, top of pistons polished to keep temps. down, new crank, block deburred, crank deburred, rods deburred, pistons deburred, new clivette bearings, ARP rod bolts, new cylinder head, 3 angle valve job, port and polish of head, port and polish intake and exhaust manifolds, oversize valves, new valve seals and springs, new rocker arms, custom cam, MPFI conversion, high flow injectors, throttle body bored out, new oil pump, T3/T4 turbo, HKS SSQV blow off valve, intercooler, getrag/muncie 5 speed trans., MSD blaster coil, MSD 6AL ignition, 10.2MM plug wires, centerforce dual friction clutch, ect. ect.
theres some more in there.. but thats basically what its gonna be... later i also want to get a stroker kit for it, and do a DOHC conversion... but im just going to do all the motor stuff for now, and then go to interior (custom dash, racing seats, system, ect. ect.) then to body (body kit, lambo doors, paint, ect.) then suspension/brakes (lowering springs, sway bars, big brake kit w/ rear disc brake conversion, ect.)
"Hondas are like tampons, every pussy has one!!!"
