Just put on my new AGX's today and there is a terrible rattle. I looked through the chiltons and I think I forgot to put on the upper spring seat washer since I had coilovers before these springs. I have Skunk 2 springs on the AGX's now so do I need to get that washer that came with the stock sturts?



"sometimes the respect is more important..."

does it sound like wood? if so it means you need a new strut mount

if its the washer you think of then you know your problem already. could also be you just need to check to make sure everything is bolted down correctly

i bought new mount with the bearing from oreillys its not the mounts and i did that also and cranked down on the top strut bolt and now it stick up way higher than i think it is suppose to like an inch above the top of the hole where the strut comes out.


"sometimes the respect is more important..."

what kind of sound is it? could be something loose somewhere. you are gonna have to check everything

i checked it it is the little cup that is on top of the mount and it isnt tight and just rattles around i need to take them back off and put that washer in i think that will take care of it thanks shifty


"sometimes the respect is more important..."