Looking to see how much drop was allowed without rubbing. Looking at Modified Motoring (M2). They claim a 2.0" drop all around. I didn't know if that was too much for it to rub.
1996 Sunfire, 2.2L, 18" Equus/General Exclaim UHP
Alpine CDE-9845
My car was on Skunk2 coil overs that were so low it ruined Koni Reds. I had Zennetti Vega 215 35 18's no rubbing issue. Now I have 225 40 18 with Megan springs and kyb shocks n struts still no rub
Ok, thanks bro.
1996 Sunfire, 2.2L, 18" Equus/General Exclaim UHP
Alpine CDE-9845
dont get those springs had a buddy get them and dropped the car roughly half an inch and was bouncy as hell.
why on earth would you drop a cav on 18s !
i had 18s with 35mm offset and a 1.5" drop on Gravana coilovers
My car may run 18s, but I can do your taxes in 10 seconds flat.
JBO lube - they would never have enough in stock and we'd never see RodimusPrime again
18" with 45mm offset here with bags
I have 18's with a pro-kit and AGX's and they stick like glue and look real good!
Whats up people?
i have 18x8.5 lowered on gc coilovers and koni yellows
im dropped on 18s .. 18 by 7.5 with a 35mm offset
lowered on d-specs and sportlines..
no rubbing till i spaced the rears.. fronts are fine
I'm on 18''s, with D-Specs and Sportlines. I don't remember the offset though.
18x8 45mm Offset Dropped 1.8 inch drop.No rubbing.
Quiklilcav wrote:Machzel08 (Teh Jew) wrote:i had 18s with 35mm offset and a 1.5" drop on Gravana coilovers
Spencer wrote:18" with 45mm offset here with bags
It might help anyone wondering about offset/fitment if you guys had your width listed. 
hmm i think the tires were 225/40/18..they were Nex-O PX5s
My car may run 18s, but I can do your taxes in 10 seconds flat.
JBO lube - they would never have enough in stock and we'd never see RodimusPrime again
18x8's w/ a 42mm offset lowered on a pro-kit drop. no rubbing at all. might rub on the fender if i go lower.
WiGM-Tuners member.
this thread sucks no pictures all i'm seeing is people talking!!
18x7.5" - 225/40/18 - +45 offset
Lowered on Sprint Springs and Tokico D-specs
Springs are rated for 1.8" drop in the rear. and they sagged roughly down to 2" the but the springs are made for 96-02 Z24 when developed.. so anyone with a 2200 or eco will have problems with the back end looking like its lower. Mainly because it is with a lighter motor in the front the springs don't sag as much as supposed to. Some people like it, i hated it. rather the front be lower then the rear. Thats why if i ever lower the car again its getting coilovers. Didn't have any rubbing issues either.
Edited 1 time(s). Last edited Sunday, August 22, 2010 9:18 AM
i was dropped on some american racing 18's i had 225/40/18's on it and they were 8 inch wide.... i am lowered on the tain basic damper kits with the rears all the way down and the fronts 3/4 down.... no issues other than had to get a camber kit....
I have eibach sportlines with 215/40/18 and doesn't rub at all. And with a v6 swap.
C:\Users\Phillip\Pictures
im sitting on 19x8 with tein basic coilovers no rubbing at all
RIP Cpl Derek Kerns And Cpl Robby Reyes
24th MEU VMM-261 (REIN) V22 Crewchiefs
11 April 2012 Morocco (African Lion)
