my rear bearing is shaking and its bent on the passenger side the wheel fits the shape of the body(which is really bad)

i'm not sure about how to tell camber. from the top or bottom.
the top faces away from the car. i checked the bottom and nothing else seems to be wrecked.

when i started having that shaking problem from the passenger side bearing, i heard a BANG and i found my damper(or shock?) dead. the car looked lower on the driver side, and sometimes when i hit a pothole or brake. it goes BANG!

so, all i need to know is: would a 92 - 94 jbody bearing be the same?

if you have a 2000, i would get the one thats made for your year... theres a posibility they are similar, but not always the same spec.

sounds like positive camber if the top is farther out that the bottom, and if your strut is bad, it may have a bent shaft as well.


had to hit something pretty hard for all that to occur, or it might be a blown strut mount