what plug in do i use too hook up the cobra/lighting intercooler pump?And what do i spice the wires into? I just order the pump today.
thanks,james

anyone?????

I was told to find an old injector connecter. They are suppose to work. Other then that, you can solder striaght to the pins and then create your own disconnect harness.

I never needed to to that, as I was able to get the connecter from a wrecked cobalt.

http://www.zzperformance.com/grand_prix/products1.php?id=816&catid=139

i thought about this alot. i don't want solder anything what does that injector harness look like on the cobalt SS
any idea on a part number. im ready to bleedout my@$$ to get that conector

i special ordered the cobalt SS harness pig tail it was $20. The pump can be grounded right down where you mount the pump pretty much anywhere. The power can be spliced off the fuel pump relay coil side. The pump itself should be hooked directly to battery power (fused) and operated via its own dedicated relay. Your relay coil side signal will come from the fuel pump relay coil side signal as said before. Simple and works great have had mine that way forever.



ASE Master Certified Automotive Technician

[quote=CaliforniaDomestics®]i special ordered the cobalt SS harness pig tail it was $20.

part number?


_______________________________________________________________________
my carDomain updated 11/5/07 I've got premium. Yes I do. I've got premium. How 'bout you?

i use a 2.4 injector connecter... i have another one sitting right here..
later,james

so the harness has to be plugged in or soldered on? i know this would be to much to ask but can you post a picture of it.