well friday I am installing a stage three clutch and flywheel from spec. If anyone has any tips or pointer to make it go smoothly it would be greatly appreciated. thanks

Smoothly? Umm... depends. You changed a clutch before? You doing it by yourself? In a shop? On a lift? On jackstands?

Basically, you need to drop the tranny... so take off the wheels, undo the big (30mm?) nuts on the axles.. take out the axles.. support the motor, drop the trans, then replace the clutch.

Get the flywheel resurfaced while you're at it. Probably too late, but while you're there you might want to consider some poly trans mounts..




<a href="http://www.lenkorules.com/"><img src="http://s93165229.onlinehome.us/images/misc/redsig.jpg"></a>