Well I'm about to swap my interals over into the new 2.4 case. So you know I got a used transmission that had bad mounts on the case. Nothing to bad, but a new case was free for me. I'm about to send it out for powercoating. After I get this back I'm going to swap everything over and do the 2.2 gears on the upper gears for some nice gearing for me. So I'm going to need new gaskets for the whole thing. If anyone knows what all I'm going to need please start me up a list. You will really save me a headace of tryin' to find all of this.

Can someone help me out with what I need?

I ordered a gasket kit from GM parts direct. What I got was a couple of axle seals and the gasket for the cover that goes over 5th gear. When I split the tranny case, there was no gasket there at all. Some RTV sealant would work there




Jason
99 Z24
#25 to register on JBO!!
Racers Edge
Johnny Mack Turbo Systems
Engineered Performance

you no gasket , just silicone

^ what they said^ RTV and new axle seals is all I used when I did mine. If you have any ?'s just shoot me an e-mail. Do you have a GM manual for isuzu transaxle?





"The FACTS are always subject to CHANGE once the TRUTH is applied"
"In the entire history of man the only stupid questions are the ones that don't get asked"

Well I can just get a printout up at the dealership if I need one. I'm going to maybe try it, but I might have some of the guys help me on the weekend and just take my time. Thanks guys. Both of you have done so much for me, and I owe you both big time.

www.alldatadiy.com helped me out a lot on my rebuild




Jason
99 Z24
#25 to register on JBO!!
Racers Edge
Johnny Mack Turbo Systems
Engineered Performance