I used the search and came up empty handed....i say somthing that said all 4t40E axles are the same but i have no idea what that tranny code is, i would assume the auto izuzu's ??

Anyway here is my dilema, i am wondering what if any, parts from a 97 Z24 Izuzu can work with a 00 2.2L Getrag.....

Axles

Clutch master cylinder

Flywheel

Cables and shifter ( i found out these are not compatible and grabbed some of the JY)

Mounts (will i need to buy all the getrag mounts or can the izuzu's be made to work) i have read they are diff. but which ones ?? there are 2 mounts on the 5 speeds correct ?? anything else you can think of that i need to get a 2.2 Getrag to work on a 95-99 J would be great...


thanks for any and all help guys !!!

Dave

Auto = 4T40E (4 speed) or 3T40 (3 speed) *** NOT ISUZU

isuzu = 5 speed manual 95-99

getrag = 5 speed manual 00-05


I'm not really sure on what you're trying to do... it sounds like engine & trans swap to a getrag trans? used to have an isuzu trans? auto axles are not compatible, so don't even bother with them.

Talk to Nate aka c24na. He went from 95 2.2L to a 01 2.4L.

no they are not interchangable.( talking apples and oranges.)