Okay guys so I am about to put my NVG-T550 trans on my 98 2.4l and I am wanting to know if I can swap the external slave with my isuzu internal slave? The diameter of the hole is the same on both transmission cases and it seems to fit but I am wondering if I missed something? Any reason it wouldn't work? By the way I am using the stock 2.4l flywheel and a ACT 6 puck clutch for the 2.4l.

Thanks in advance.

if the trans is a external slave yes u can retain it. i used my third gen m/c and the m/c half of the line then about half way i cut the plastic line and used the slave end from a second gen cavalier external slave line. i coupled them with a compression fitting i was planning to keep it temperary but its been just fine. the lines are diffrent sizes so the fitting is a adapter fitting i forget the sizes tho.

Thanks for the advice I will try to find a second gen line.