what are these wheels? i know they are discontinued enkei rims... dont know what model... im looking ALL over for them, but its hard with no name.
they are curved like these Enkei Shoguns...
BUT there are more spokes like these Enkei J10's
second question
WRX wheels... i believe they have a 5x100 bolt pattern, does anybody know the offset? and will they fit on a cavalier?
third question
anybody have any time to chop those Enkei wheels and some wrx wheels on my car for me?
thanks!...
i cant answer your first question because i dont know the answer. cant shop the rims on the car because i dont have the programs...
but heres the answer to your second question.
the bolt pattern is supposed to be 5x100 on the wrx BUT the STi is 5x4.5" apparently. the offest is in around the 55mm mark.
here is the link i found that info on...
http://www.cars101.com/subaru/tiresandwheels.html
here is a post i made a little while back about some wheel specs for various cars...
http://www.j-body.org/forums/read.php?f=42&i=33152&t=33152#33152
there it doesnt show the offset, but it does show the bolt pattern and bore of the wheels hub.
Quote:
Chevrolet Cavalier (all models) 1989-up (5x100mm / 12x1.5 Lug-nut / 57.10mm Bore)
and...
Subaru Impreza 1993-up (5x100mm / 12x1.25 Lug-nut / 56.15mm Bore)
unfortunatly i dont think the wrx rims will fit unless you got them bored out more to fit your car.
1997 RedR - ZedR
^^^ correct
the bore size of the back of the wrx wheels are 1mm smaller so you would need to get it bored out 1mm in order for it to fit properly. tc wheels fit though
might not be right, but it was the first thing that popped into my head... they're the enkei WDM's. thats the best pic i could find
Check out my build thread!
could these be what your talking about?
enkei arashi
I NEED a 97-99 LD9 engine harness for an auto.PM if u hav info.!!
THE ARASHI!!! thats them. thanks for the replies guys... my computer is in the shop so ive been using other peoples computers... thanks for the replies... and damn about the WRX rims... thanks again
no problem. i thought it might of been the arashi's
I NEED a 97-99 LD9 engine harness for an auto.PM if u hav info.!!
