35mm Offset Clearance Issue? - Wheel and Tire Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
35mm Offset Clearance Issue?
Monday, February 18, 2008 11:59 AM
Is anyone slammed on a 205/55R16 tire w/a 35mm offset wheel? Did you have a clearance issue with your fenders?



Edited 1 time(s). Last edited Monday, February 18, 2008 12:01 PM



Re: 35mm Offset Clearance Issue?
Tuesday, February 19, 2008 1:09 AM
This is a 35mm offset with a 19x8" wheel




Unless your on air, any lowered suspension should be ok with stock sized tires and the 35mm offset I would think. How low are you gonna go?



Re: 35mm Offset Clearance Issue?
Tuesday, February 19, 2008 3:55 AM
Im going with air. I have 16x7.5 - 35mm offset wheels on my cav now. I am wondering if they will tuck or if i would need toyota fenders or to roll my fenders.



Re: 35mm Offset Clearance Issue?
Tuesday, February 19, 2008 7:39 AM
I cut off the bottom edge of the fender lip up front. NOTHING IN THE REAR



Re: 35mm Offset Clearance Issue?
Tuesday, February 19, 2008 7:56 AM
Im figureing that my rears will tuck, but my fronts might be sitting on the tire. It'll be close thats for sure.



Re: 35mm Offset Clearance Issue?
Tuesday, February 19, 2008 9:26 AM
I have the same offset i think coming on my mr7's... i hope i dont have any problems.. im going to try to run 255/50/16.. anyone think i will have issues?? I have an 03.


http://www.jbodytuner.com
^^ The real jbody store and forums!!!!!
Re: 35mm Offset Clearance Issue?
Tuesday, February 19, 2008 9:32 AM
i had 18x7.5 35 offset 225/40 with a drop (not air though) and it needed rolled rear fenders.



-----------------------------------------------------------------------

-----------------------------------------------------------------------
- Sold my beloved J in April 2010 -
Re: 35mm Offset Clearance Issue?
Tuesday, February 19, 2008 10:55 AM
Damn, i guess its time for some different rims.

What offset is the best for tucking 7.5' or 8' wide rims with either 215s or 225s?



Edited 1 time(s). Last edited Tuesday, February 19, 2008 11:12 AM


Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search