Here are my first couple fg projects, 3 gauges in the dash and a fg'ed door panel with a 61/2 in it






both projects are not done cause i am having alot of problems with the filler, i used 60 grit on a palm sander for most of it until relativly smooth than worked up from 100-800 with hand and still big chunks are coming out and i can never get it how i want it, i have to keep laying more layers and the dang thing is getting heavy i think its just cause i am using BONDO brand filler, its like the cheapest filler out there so i think i learned my lesson


"sometimes the respect is more important..."

you might not be putting the right amount of hardener in it. too much will make it brittle.




Check out my CARDOMAIN page

big chunks falling out?

yup what ^ he said. you might be using the wrong ratio of hardener. Also the filler shouldn't be used too thick at all...it is more of a thin coating to level out the fiberglass work.

that or you are not mixing it well and leaving hardener out of spots. ive used bondo severl times in a pinch and ive never had the issues your having.


http://www.flickr.com/photos/sndsgood/ https://www.facebook.com/#!/Square1Photography