wanting to go boost - Newbies Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
wanting to go boost
Tuesday, June 05, 2007 11:18 AM
ive been into honda all my life. my 04 chevy is my first. i want to boost it but dont know the characteristics of the motor. i found a turbo kit on ebay. not a bull@!#$ one but a good one. comes with fmu and everything else. i just want to know how much boost can i run. i just want to run 6 lbs. thats all just to say its boosted. i know i have to tune it. but what brands are there? how do i reflash and what company. i know honda companies but dont know chevy after market. anything would help. thanks.

ECOtec DOHC


Re: wanting to go boost
Wednesday, June 06, 2007 3:39 AM
look in the tuning section on jbody and you can find the kit that everyone else uses 6 lbs. is good for any engine in good running order just do yourself a favor and be careful with the boost controller and boost creep... that'll kill ya..


Drive Fast Take Chances
Re: wanting to go boost
Wednesday, June 06, 2007 8:32 AM
id rethink the ebay turbo kit..even if it has a fmu....the parts are usually sub standard and you can get a better kit if you piece it together with high end parts. As for tuning scrap the fmu and go hpt. Try looking around the tuning section as mentioned and also boost questions are better awnsered in the boost section..phil
Re: wanting to go boost
Wednesday, June 06, 2007 8:43 AM
Hahn Racecraft makes turbo kits for Cavys:
www.turbokits.com
says you can run these turbos at 8 PSI safely.



http://www.cardomain.com/id/Gerkn

Re: wanting to go boost
Wednesday, June 06, 2007 12:22 PM
Hahn is good. Also, being that you have an Eco... GMPP makes a supercharger kit for your car. Some people are getting very good results from it.

Don't worry about the Eco handling boost. Just don't go crazy with it. Stock wise, the Eco can handle alot of abuse.



Re: wanting to go boost
Wednesday, June 06, 2007 1:32 PM
You don't need to tune anything with an FMU, that's the whole point of running an FMU. I also wouldn't worry about anything more expensive or involved than an FMU for only 6psi. Get the kit, be happy. What's going to break? The turbo? Who cares... the kit was so cheap you can get a real turbo and still be WELL under the price of a hahn kit.


______________________________
'96 GSX
towed more often than driven
Low Boost - 12.31 @ 115
- 349awhp/304ft.lbs
Re: wanting to go boost
Thursday, June 07, 2007 8:44 AM
thanks alot guys. great info.

ECOtec DOHC

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search