I have a 96 cavy 2dr 2.2L and I want to replace stock bumpers with Z24 bumpers. Is it just as easy as taking them off and putting the new ones on? Or is there something I'm missing? Do like the bumper reinforcements need to be replaced or what..? Please help. Thanks.
fender liners are different...thats all
blinker fluid might need to be replaced also when you switch front bumpers..
POLYFIBER kits $375 (BMX, BC2, Blitz, Drift, KMAX) *
CRACKED DASH? CLICK HERE!!
www.WinksOnline.com wrote:blinker fluid might need to be replaced also when you switch front bumpers..
while i'm at it, should i replace the muffler bearing, too?
HAR HAR that was funny, i just needed a straight answer, not a smartass one.
but thanks.
thanks bagged
im glad they just go right on
DrPaul84 wrote:fender liners are different...thats all
^ Exactly. You would need to use the Z24 fender liners as well, so no, they don't just bolt on. This is only true for the 95-99 Z24 bumper, the 2000+ swap is the same, fenderliners and all.
4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!
Shifted wrote:DrPaul84 wrote:fender liners are different...thats all
^ Exactly. You would need to use the Z24 fender liners as well, so no, they don't just bolt on. This is only true for the 95-99 Z24 bumper, the 2000+ swap is the same, fenderliners and all.
true. i figured since she has a 96, she was just gonna swap out w/ the 95-99 bumpers
[quote=ßãggéÐÇåv98 (Ûñqùðtäߣè Øñé)]
Shifted wrote:DrPaul84 wrote:fender liners are different...thats all
^ Exactly. You would need to use the Z24 fender liners as well, so no, they don't just bolt on. This is only true for the 95-99 Z24 bumper, the 2000+ swap is the same, fenderliners and all.
true. i figured since she has a 96, she was just gonna swap out w/ the 95-99 bumpers
not entirely true. you don't NEED fender liners from a Z24. you can just trim the base model ones to fit the Z24 bumper. thats what i did.
5 YEAR ANNIVERSARY FREEBIE GIVEAWAY - CLICK HERE TO ENTER
What you know about Street Racing anyways? Only what Fast & Furious taught us....
SO EVERYTHING!
thanks for the help guys..
i'll probably just trim the fender lines
www.WinksOnline.com wrote:blinker fluid might need to be replaced also when you switch front bumpers..
dont you feel like a dick now
good job cavy girl
www.WinksOnline.com wrote:blinker fluid might need to be replaced also when you switch front bumpers..
ok i imagine some of you know this, but thats from Red VS Blue, me and my friend dan used to tell people that their blinker fluid was low all the time, it was hilarious, and cavy girl, i'm sorry that you needed a straight answer, but if you saw that episode of Red VS. Blue you should at least get a giggle out of it
i know i did!
ps remember to post pics when it's done!
"I live my life a quarter mile at a time..." "for those ten seconds or less I'm free"
i am prety sure there are 3 liners, 2 small ones on each end and a longer one in the middle. You will most likley have to take the 2 small ones off and trim the cennter one, they are riveted on so i dont know how you would switch em out. Just toss on the new bumper and see where it hits then trim from there.
i used the 2.2 fender liner on my Z bumper and it works like a charm!
Mysterio wrote:www.WinksOnline.com wrote:blinker fluid might need to be replaced also when you switch front bumpers..
ok i imagine some of you know this, but thats from Red VS Blue, me and my friend dan used to tell people that their blinker fluid was low all the time, it was hilarious, and cavy girl, i'm sorry that you needed a straight answer, but if you saw that episode of Red VS. Blue you should at least get a giggle out of it i know i did!
ps remember to post pics when it's done!
OMG that's hilarious you tell people that! TEE HEE.
i'm just going to pop on the bumper and see where i need to trim, i guess.
i'll post before and after pics.
thank you all
