HID ballast mounting location? - Exterior Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
HID ballast mounting location?
Tuesday, May 05, 2009 11:26 AM
Was wondering if anyone can provide some pictures of where they mounted their ballasts.

Re: HID ballast mounting location?
Tuesday, May 05, 2009 12:01 PM
No pics but on the passenger side, its mounted on the pcm and on the drivers side, on the plastic intake/bong



Re: HID ballast mounting location?
Tuesday, May 05, 2009 12:07 PM
I like the frame rail that is basically right underneath the corner lights.





Re: HID ballast mounting location?
Tuesday, May 05, 2009 12:36 PM
John Benham wrote:I like the frame rail that is basically right underneath the corner lights.


Yup. Mine are in pretty much the same spot on both cars. Nice and out of the way.



M62, 42's, ZZP 3", ZZP S3 H/E
214whp 190wtq
Re: HID ballast mounting location?
Tuesday, May 05, 2009 7:35 PM
My passanger side is by the horn tucked up under the inside of the fender. Driver side is under the fuse box mounted to the fender.

If I remember this weekend I'll try and get some pictures!



Lanman31337 -F = fatties = do not want. A little chunk in the junk is ok though.

Re: HID ballast mounting location?
Tuesday, May 05, 2009 8:02 PM
I mounted mine right under the headlights.. they're slim ballasts though.



Re: HID ballast mounting location?
Tuesday, May 05, 2009 8:37 PM
Chesta717 wrote:I mounted mine right under the headlights.. they're slim ballasts though.


X2



FOR SALE
Re: HID ballast mounting location?
Wednesday, May 06, 2009 8:06 AM
Mine are right behind my corner lights.



Re: HID ballast mounting location?
Wednesday, May 06, 2009 10:21 AM
^^^ Same here.



Re: HID ballast mounting location?
Thursday, May 07, 2009 12:20 AM
When I had HID's, I took off the bumper bar and slid the ballasts into the front of the frame rails.. useless space anyway...



Re: HID ballast mounting location?
Thursday, May 07, 2009 8:59 AM
John Lenko wrote:When I had HID's, I took off the bumper bar and slid the ballasts into the front of the frame rails.. useless space anyway...


Exactly what i did.

Remove the bumper and there are tons of spots. My 2nd HID kit (for fogs) is screwed to the plastic honeycomb inside a small gap on the front rebar, also. I like having a clean front end with no boxes or anything showing.... takes a bit more time but looks 5000x better.

-Chris-



-Sweetness-
-Turbocharged-
Slowly but surely may some day win this race...

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search