So my car has been sitting in the garage for quite some time, not running. its got no engine in it, no trans, and not a single wire in it. Stripped the interior down and ground out all the sound deadener and rhino-lining looking @!#$ thats all around the front footwells and near the back seat. I've finally got a GOOD job, so im getting paid fairly decent meaning i can finally work on it again. What i want to know, is what all inside the car needs to be wired up to make it start and run? I'm not concerned about lights, gauges, or anything like that. most of that isn't really imporant since the car is going to be an exclusivly track based car, and i have the aftermarket gauges for whats essential (fuel level, tach, oil pressure, water temp, boost, and a clock lol). So far all i can figure out that needs to be hooked up is the PCM, the wires tothe fuel pump and the ignition/key thing (including the clutch saftey thing). did i forget anything? Sure hope not...
------------------------------------------------------------------------------------------------------------------------------
Mike wrote:The auto to manual swap is not as involved as you would think.
Get all the parts you need in a pile, and drive the car into it.
They will find their way into the correct places.
What kind of racing will you be performing in?
DiamlerChrysler Certified Technician
ASE Certified Technician
Option D Racing Member
a clock is an essential gauge?
Fall 08 Omaha/western Iowa area meet...
CLICK ME!
just some stuff at the local track... time attack style racing,, really.
and yes, a clock is essential... gotta get there on time lol
------------------------------------------------------------------------------------------------------------------------------
Mike wrote:The auto to manual swap is not as involved as you would think.
Get all the parts you need in a pile, and drive the car into it.
They will find their way into the correct places.
gotta be back in time....
*insert huey lewis abd the news song here*
Fall 08 Omaha/western Iowa area meet...
CLICK ME!
great, so we've covered my sarcastic clock thing, now can someone answer the question?
------------------------------------------------------------------------------------------------------------------------------
Mike wrote:The auto to manual swap is not as involved as you would think.
Get all the parts you need in a pile, and drive the car into it.
They will find their way into the correct places.
