Ok, how do you "pop" off the shifter cables from the tranny and the shifter stick?

All the haynes manual says is to use a screw driver to 'pry' something off, but doesn't really show/explain what.

Anyone give me some better details, pics maybe?


<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -

any body?


<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -

They are stuck on there pretty good. I just did this last week. I used the biggest screwdriver I could fit then gently pried it up and off. Sorry no pics. They will pop off.


Labrat

I got the smaller one with the bulge on it off, but can't get the other one to move.


<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -

Ok, I got all of them free but one. The passenger side cable.
I just can't get any leverage over it, every time I start prying with the screwdriver the metal bracked moves and it wont pop off.
Suggestions?


<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -

suggestions: use a c-clamp to hold the bracket in place and pry it off...


98z24, lowered 2", aem intake, cat-back striaght pipes!, cop ligths in the front and rear, 18" liquid metal's, primer black, tint, full audio and video.

Ok I'll try that


<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -