compression test - Maintenance and Repair Forum
Forum Post / Reply
You must log in before you can post or reply to messages.
I read in my haynes manual how to do a compression test. Now my ? is, where do I buy the tool to test the compression? Like, would it be as simple as going to advance and purchasing the kit? And how much do they usually run?
Thanks!
98z24, lowered 2", aem intake, cat-back striaght pipes!, cop ligths in the front and rear, 18" liquid metal's, primer black, tint, full audio and video.
yeah, parts stores carry them and so do places like harbor freight.
so does snap on, and matco, etc.....but they are pricey.
I bought mine at harbor freight for $20.
20 bux is pricey? I will do some shopping today and see where I get... Thanks john.
98z24, lowered 2", aem intake, cat-back striaght pipes!, cop ligths in the front and rear, 18" liquid metal's, primer black, tint, full audio and video.
no....snap on would be about $200.....thats pricey.
$20 is hella deal.
rent it from auto zone
Kill list:03 eclipse, 06 GTO, 04 Mach 1 Mustang
yeah, I called advance and they have one I can rent...
98z24, lowered 2", aem intake, cat-back striaght pipes!, cop ligths in the front and rear, 18" liquid metal's, primer black, tint, full audio and video.
I am about to do the test, what shold my #'s be?
98z24, lowered 2", aem intake, cat-back striaght pipes!, cop ligths in the front and rear, 18" liquid metal's, primer black, tint, full audio and video.
I bought the tool for $25 at autozone, and I did the check, and I have a reading of 105 on the first stroke, and building about 30 psi per stroke after that to the tune of 205 psi on the 4-5 stroke. It is the same across all cylinder's as well. I just want to know if I have a healthy engine because I really want to add nitrous, and the haynes manual does not specify on what the psi should be. Thanks in advance!
98z24, lowered 2", aem intake, cat-back striaght pipes!, cop ligths in the front and rear, 18" liquid metal's, primer black, tint, full audio and video.
I jsut did some researching and found out that stock compression is 9.7:1, so what am I pushing with my #'s?
98z24, lowered 2", aem intake, cat-back striaght pipes!, cop ligths in the front and rear, 18" liquid metal's, primer black, tint, full audio and video.
Forum Post / Reply
You must log in before you can post or reply to messages.