How the hell do you get the clutch line from the master cylinder back into the quick release housing?
Also, I pulled a master cylinder out of a car at the junk yard, and after it came out it wont budge.
Same thing with the old one I pulled out of my car. Whats wrong with them?
Help me please.
<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -
Bit more details...
I got the master cylinder back in, but the piston wont budge.
<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -
Ok, we had it working for a bit, while we bled it. but then it jammed up again.
what the heck?
<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -
Ok, when we start to bleed it, if you pump the clutch rapidly it'll start to build pressure, but looses it as soon as the fluid reservoir is empty.
BUT if you close the bleeder valve the whole pedal/master cylinder will lock up.
<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -
Any one? I'd like to drive my car again
<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -
Well its working fine.
Let it sit over night, bled it a bit and afterwards just kept pumping the pedal and now its working great.
<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -
Well I got it working. Thanks for all the help.
<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -
