the pressure is at 60-70psi at idle.
i have the accel adjustable regulator and when i turn the adjustable screw all the way out to get minimum pressure i still get 50psi!
i have an other accel fpr laying around, tried to swap and still got the same problem, same pressure!
any one can help me? why cant i lower the pressure?
Is that with hose connected or not?
Also I have had bad luck with the accell AFPR. I had one bust, knew of others who had that happen. I would run stock over it personally.
FU Tuning
yeah everything connected.
i cant imagine that both the accel fpr i have are bad and that both lower psi i can go is 50psi
Hmmmmmm... I've had my Accel for over 3 years, and it's been adjusted from 30 psi up to 70 psi. I keep it around 58-60 psi right now. No problems so far.
Currently #4 in Ecotec Forced Induction horsepower ratings. 505.8 WHP 414WTQ!!!
Currently 3rd quickest Ecotec on the .org - 10.949 @ 131.50 MPH!!!
can a clogged injector cause this?
i listened to each injector with a stetoscope and one sound different.
also when i step on it, a/f stays in the 14-15, usualy goes to 12.8
