Hi,
I need to know what i need to do so i have my car recalibrated. Is there anyway of having the PCM or ECU reprogrammed and be in the car. Damn dealer won't do it.
They said my car has to many modifications and to many wire that won't work on a car with so many modifications. I have some guages with wires a grounding kit intake etc..
2004 Grand Prix GTP (Competition Group)
SOLD-->1999 Z24 5M-#30 to register on JBO
"You can please some of the people some of the time but you can't please all the people'
all the time
thats B.S. they upgrade the PCM from under the drivers side dash. if you look you'll see it. you need to find another dealer.
Just take the PCM out, and have them reflash it out of the car. Probably take you 10 minutes to remove it.
But yes, they can reflash in the car. I can see why they wouldn't though, if you tap into the wrong wire under the dash and it starts sending voltage through an arbitrary pin in the OBD port under the steering wheel, you could burn out the $3500 Tech2.
4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!
Where is the Computer? Is it in the fender well of the car.
2004 Grand Prix GTP (Competition Group)
SOLD-->1999 Z24 5M-#30 to register on JBO
"You can please some of the people some of the time but you can't please all the people'
all the time
I called another dealership that will allow me to bring in the computer and do the calibration.
Funnything is that this dealership and the one i went to has the same owner i guess different jerks working the service department.
Just need to know where is the computer i need to remove.
2004 Grand Prix GTP (Competition Group)
SOLD-->1999 Z24 5M-#30 to register on JBO
"You can please some of the people some of the time but you can't please all the people'
all the time
