Anyone have any pics of the 2.3L power steering pump bolted up? I need to see how the brackets are attached both to the pump and to the block/trans.
2010 Subaru Impreza WRX Limited
1999 Cavalier Z24 Supercharged
1999 Grand AM SE (Beater Car)
1997 GMC Sierra
2007 Honda CBR 600RR
2005 Honda TRX450R
here is what i have
here there is suppose to have another bracket that i couldn't find so i didn't use any... its suppose to bolt to the tranny
mine is cracked, and still works, i also dont have the outer bracket, you dont "need" it.
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
Magik....how the hell did you get the PS pump to clear the hood? It seems no matter how I set it up, the reservoir tank sits too high. Either that, or the belt hits the corner of the head. Any tips on how you got it to work?
2010 Subaru Impreza WRX Limited
1999 Cavalier Z24 Supercharged
1999 Grand AM SE (Beater Car)
1997 GMC Sierra
2007 Honda CBR 600RR
2005 Honda TRX450R
i think your putting it on backwards, it sits under the cam.
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
That's where I have it...under the cam. The reservoir tank sits up too high...
2010 Subaru Impreza WRX Limited
1999 Cavalier Z24 Supercharged
1999 Grand AM SE (Beater Car)
1997 GMC Sierra
2007 Honda CBR 600RR
2005 Honda TRX450R
give me a call at work Monday.
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
Well I found pics of how it is mounted...there is no way that I can mount the pump the same way. The belt hits the side of the head. The 2.4L head must stick out way farther than what the 2.3L head does.
2010 Subaru Impreza WRX Limited
1999 Cavalier Z24 Supercharged
1999 Grand AM SE (Beater Car)
1997 GMC Sierra
2007 Honda CBR 600RR
2005 Honda TRX450R
^ Get your grinder out and fix it...lol
^^^^^^^^^ Luke I also found this out.
The power steering pump pulley hits the where the egr would be.
Has anyone ever ran a 2.3l pump on a 2.4L head?
