I have searched and have come up with nothing. I am in the process of doing an eclipse ignition coil conversion, but I am wondering which wires do I use from the 2.3L IC connector to solder to the eclipse IC connector? I saw a write-up of it being done on a 2.4L, but the connector looked way different from mine. If anyone has done this or knows the wires I use I would really appreciate your input.
Thanks


1BadHeartBeat

my advice....drop the eclipse stuff and get the msd with adaptors. .. MUCH easier and looks way better

I'll search that and see what comes up. Thanks!!


1BadHeartBeat

Is it a kit that you are talking about? I didn't see anything for Z24 Cavaliers,maybe I missed it when I looked.


1BadHeartBeat

http://www.turbotechracing.com/productcart/pc/viewCategories.asp?idCategory=385

get the "msd blaster coil pack set" and the "msd coil interface module kit"
those two together will wire up VERY easy to your stock icm

thanks man!!


1BadHeartBeat

Alright...Coil Pack, Module Kit, and I am guessing the Nology Plug Wires....


1BadHeartBeat

whichever plug wires you wish

Thanks again!! Less stress I will have installing this.


1BadHeartBeat

Finally ordered everything and will install next weekend when I have soem free time.


1BadHeartBeat

Good luck with it and post up pics.

Does anyone know the correct way to wire these to my ICM? I just wanna make sure I have a good gameplan before I start next weekend.


1BadHeartBeat

the diagram is posted on here somewhere..someone might know off hand..but id go ahead and search

ok thanks


1BadHeartBeat