This is the Aeromotive afpr I'm looking to purchase.
I'm replacing the Accel afpr which is giving me some problems with the long term storage of my Cavy.
This is the Aeromotive model 13106 afpr which fits the LT1 Vettes.
It's near if not exactly identical to the stock fpr that fits onto our 2.4 fuel rails.
My only uncertainty is that with the size of the Aeromotive unit, if it will fit onto the factory fuel rail, and not hit the timing chain housing.
I do plan on getting either the Venom or AEM fuel rail to replace the stock unit down the road.
But for now, I need something besides stock (as a replacement for the Accel) so that I can keep things in the state of tune I already have.
Opinions please whether this will work.
Misnblu.com
Newbie member since 1999
Thank you Dave and JBO! 
I guess nobody knows.
Seems unlikely but seems to be the case.
I'll make it work and continue on with the Cav.
Thanks for the help.
Misnblu.com
Newbie member since 1999
Thank you Dave and JBO!
It works on the Ecotec....I know that. Doesn't help you much though LOL.
I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Ive seen that on 2.4's before..
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
i HAD that regulator on my quad(same fuel rail) and had to take it off and get the accel..i cant remember why, but i had some kind of fitment issues..may have involved the gauge though..all i remember is i couldnt use it
the LT1 fprs , 1 fits the eco , and the other fits the 2.4
i dont remember which is which , but the aero was close to the timing cover on a 2.4
that was it..it fit my rail but hit the timing case cover..so with it on i couldnt line up the injectors and rail bolts..had to send it back
That's what I was afraid of.
I'll just hit the junkyard, get a stock one off of a 2.4 to get the car going again, and start setting up my braided fuel lines I've always wanted.
Then I can add whatever afpr I want.
Thanks all.
Misnblu.com
Newbie member since 1999
Thank you Dave and JBO!
sorry to raise the dead, but........
I have 2.2 eco, do i need part # 13106 or #13107 ?
the 13106 is supposed to fit 92-96 LT1
the 13107 is supposed to fit 94-97 LT1
I'm only getting a FPR because i want to run a 50 dry shot this summer,. and i have read that the Aeromotive is a direct fit.
Doesn't anyone run one of these?
I'm pretty sure it is the 13107. Man its been a couple of years sense I bought mine..
For the Ecotec use the F-body one. Corvette unit does not fit. I have done this, and can vouch for it being a direct bolt on.
I know the afpr that fits the camaro will fit the ld9 I think its the 94-97. The eco and ld9 might use the same one I dont know for sure.
hmmmmm... So does anyone with an eco run a FPR? if so which one
so... been doing some research in this department the past few days...
first off, it seems that aeromotive used to make this same part number but had a completely different design a few years back.
seen here:
it has since been discontinued, unfortunately and replaced with
this. and now it does not fit, as said...
now... holley has one that may fit, but i need the dimensions on the NEW style aeromotive for comparison. havent been able to locate any. the holley one is:
Shipping Dimensions
L 3.500 in. x W 2.500 in. x H 3.500 in.
Weight 0.450 lb.
seen
here :
if anyone has pics of their aeromotive i would like to see them in here...
thanks guys.
Every time I scream "Release", I mean it, you know it. I feel the day. Black 7.
Nice find man. I like that. But I wonder if that was 1:1 ratio for boost.
Listening...
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
WHITECAVY wrote:Nice find man. I like that. But I wonder if that was 1:1 ratio for boost.
Listening...
Yep. My AEM FPR is also 1:1 under boost. If there is no boost then it acts like a regular adjustable FPR
Jason
99 Z24 Supercharged
157hp/171tq - NA
190hp/170tq @ 6psi
LG0/LD9 for Life
well the holley AND the newer style aeromotive both are 1:1 for boost. i read that and said... oh.. yea, cool.
Every time I scream "Release", I mean it, you know it. I feel the day. Black 7.
That old style is tiny compared to the new one!
Brad, do you need pics of the aermotive I modded to fit the factory location?
sure... i did say post up pics LOL
Every time I scream "Release", I mean it, you know it. I feel the day. Black 7.
WOW!! that IS a tight fit lol
how you liking it so far? do you find that it helps in tuning or does hpt do it all... ??
Every time I scream "Release", I mean it, you know it. I feel the day. Black 7.
I have a 05 sunfire, I ordered the Aeromotive FPR for the F-body. Hope it fits!
