Does anybody have any suggestions on how to hook up the Oil Temp gauge on 03 Sunfire w/ 2.2 ecotech. The problem is the oil canister. If it had a normal oil filter then I could just get the glowshift oil filter adapter. Any advice would be appreciated.
oil temp gauge , the sensor needs to be in the oil pan
pressure gauge , you need a adapter and use 1 of the fittings at the rear of the head or in the block under the exhaust manifold
[quote=97cavie24ls(™)]oil temp gauge , the sensor needs to be in the oil pan
pressure gauge , you need a adapter and use 1 of the fittings at the rear of the head or in the block under the exhaust manifold
Don't you mean on the drivers side of the head? Not the rear.... (for the pressure)
"You can only feed them semen for so long before their legs fall off."
well technically the drivers side of the head is the rear , and the pass side is the front
but yes drives side just below the ps pump, and to the rear of the car(your right if you are looking at it)
