injectors question!!! - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
injectors question!!!
Monday, March 22, 2010 3:01 PM
okay. so i need new injectors in my ln2. and i have a spare 2.4L ld9 laying around. is it possible to swap the injectors from the 2.4 into the 2.2? and would it help with getting more fuel to the engine? if so please let me know! thanks guys!


1999 2.4L w/ nitrous

Re: injectors question!!!
Monday, March 22, 2010 8:30 PM
no not possible there two different types of injectors sorry for your luck just get some aftermarket ones


Erik Packard
Re: injectors question!!!
Tuesday, March 23, 2010 7:52 PM
The 94-down models have side feed injection. I believe both, the 2.4 and 95-up injectors have top feed injection. It is possible to do a conversion but you will have to do a search on it. I am not quite sure if there are any aftermarket ones for the application that you have.
Re: injectors question!!!
Wednesday, March 24, 2010 5:34 AM
I remember seeing a post not long ago stating 17lb/hr for the LN2 and 22lb/hr for the LD9, but looking at your registry you show a '95 Cavalier which are side feed (and this is the case through '97) and wouldn't be compatible with the ones on the LD9. '98-'99 LN2 came with Multec I low impedance injectors, and '00 (maybe late '99 as well) and up came with the skinnier high impedance Multec II injectors. If you go with the top feed conversion you would also have to look and using injectors with the right impedance. I don't know what the side feeds are, but a multimeter could read resistance across the coil to tell you. 2 to 6 ohms would be low impedance, and high impedance injectors are around 13 ohms or more.




Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search