Push Rods - Performance Forum - j-body.org

Forum Post / Reply
You must log in before you can post or reply to messages.

Push Rods

Sunday, May 09, 2010 8:52 PM

Does any body know were i can get some custom push rods made? I just need to take 0.045 off the rods.

Re: Push Rods

Sunday, May 09, 2010 8:56 PM

i have some custom pushrods for sale in the classifeds. if those are not the right size check out smith brothers, they make good pieces

Re: Push Rods

Monday, May 10, 2010 4:04 AM

Manley Performace made all my custom valvetrain pieces.
Rather economical as well.

I talked to Pride, he helped me out, good guy!

Re: Push Rods

Monday, May 10, 2010 5:15 AM

Does anybody know the size of a stock push rod for the vin 4 2.2.

Re: Push Rods

Tuesday, May 11, 2010 10:04 PM

Bump.

Go beyond the "bolt-on".

Re: Push Rods

Wednesday, May 12, 2010 10:14 AM

nikel, you like to tell people to use the search button all the time...

http://www.j-body.org/forums/read.php?f=2&i=400816&t=400153#400816

Jesse Heise wrote:ok i just called the parts store and they claim the 95-97 pushrods are 7.406" and the 98+ pushrods are 7.448".

MadJack wrote:The 2.2L uses a 7.406" X 3/8" pushrod and the 2200 uses a 7.448" X 3/8" pushrod

Andrew, it looks like you have a 2200? If so, the 97- pushrods are just what you need

I have a set laying around if you don't mind used parts...

fortune cookie say: better a delay than a disaster

Forum Post / Reply
You must log in before you can post or reply to messages.