Does anybody know what size the thread pitch is on the actual rack where the power steering lines connect to? I know Joshua Dearman mentioned it a while ago in a thread that I can't find. Along with my non starting issue with the car I got going on now, my power steering fluid leaked out over the weekend. I remember it happend when I was racing back in 09. I thought I got the problem fixed then.
I want to convert to SS hoses so I can avoid this again. Or, just run without PS.
Thanks.
Edited 1 time(s). Last edited Thursday, March 24, 2011 10:26 AM
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
im listening to this as i am considering not running power steering in mine
RIP JESSE GERARD.....Youll always be in my thoughts and prayers...
they are M16 and M18
Location: Montreal, Quebec
Syl, is
THIS something I could use on the rack? Along with an M18 one?
Also, how would I connect an SS line to the pump on the cam tower? Since our stock hoses just slides on one of the lines.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
WHITECAVY wrote:Syl, is THIS something I could use on the rack? Along with an M18 one?
Also, how would I connect an SS line to the pump on the cam tower? Since our stock hoses just slides on one of the lines.
have somebody with a tig weld the aluminum an fitting on the hard lines.
i used one of those adapterson my rack. as for the pump side, i just slide the hose over with a clamps
Magik- the one I posted? What did you do about the M18 one?
Good call on pushing the hose on the pump side. Drr didnt think about that lol
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
i bought 2 fitting for the steering rack side. i dont remember the size but it looks exactly like the one you posted.
on the pump side, i push the hose on the plastic connection like the stock one, for the metal one i bought another fitting of the right size like on the rack side.
Sweet thanks man.
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
WHITECAVY wrote:Syl, is THIS something I could use on the rack? Along with an M18 one?
Also, how would I connect an SS line to the pump on the cam tower? Since our stock hoses just slides on one of the lines.
I think so, but I make my own adapter and it is very similar to the link
The pump is a M16 thread
This one are cheaper
Russell Power Steering Adapter Fittings
And you cant use a clamp on the pressure side you need high pressure hose
Location: Montreal, Quebec
