So I have searched and searched the forums and I can't seem to find the wiring diagram I am looking for. I have all the MSD parts aka DIS 2 box, MSD Coils and blocks, and MSD Wires. If anyone could sheld some light on this subject or have a diagram it would be great.
*subscribed* i need this too
Here you go...
I made this up a while back, but I moved it around in my photo bucket
Here is one just for the coils
what exact;y is Launch Rev? and so the heavy red and heavy black wires both go to 12v? or does "batt" on the heavy black mean the negative term or Ground?
Rev launch is the rpm the box will hold so you can launch. Red is 12v constant power, black is ground...
Pin A on the ICM wiring harness is 12v ign.
So that dark blue wire doesn't go anywhere inside the stock wiring, but to an external Rev Launch device?
As soon as that blue wire sees ground the rev limiter will be engaged. So, hook one end of the blue to a switch and the other end to a ground, Any time u want the limiter on, flick the switch.
Is this basically the same for Ecos to or is it completely different.
