Im from Brandon and there isn't alot of part stores here, so i was wondering what the best part store to go to in Winnipeg is. I mean performance and stock parts.
It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road
well if ur looking for performance there is lots of stores, i deal with cc customs for my parts, i also can get some performance parts from work, what are you looking for, i maybe can help u out.
brad what do u plan to do to ur car, is it for shows, racing.
Its kinda for racing, or just for the thrill of speed. well right now i ordered the pacesetter exhaust with a magna flow cat., i have a 4-1 header, with a cheap intake. So im pretty much looking to upgrade it from there, not too sure yet, oh and i polished my TB and intake manifold. i was thinking about internals, like a cam shaft for starters. any suggestions would be awesome.
It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road
No one willing to help me out i was hoping someone from winnipeg could be a help.
It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road
all i know u could do next would probley get some head work done, trying to find a cam for ur motor is goin to be hard unless u get them custom made, also i would do a turbo set up, and upgrade ur igintion to a msd coil packs with wires. if racing is what u looking for
Where can i get head work done in winnipeg? or a custom cam made in winnipeg?
It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road
customs cams u would have to get a hold of some one like at comp cams there down in the states, and there are a number of place that can do head work, right now i'm looking around for a place to do some head work for my ecotec build, i'll let u know what i come up with.
Talk to Colin (V6HO on here) about headwork, he's from Brandon, living in WPG now.
15.3 @ 89.97mph - '01 SFGT
'98 Acura 1.6EL Sport 5M Y7/Y8 mini me
I couldn't get a hold of him, I emailed him but no reply, i was just wondering where i could get my head port and polished in Winnipeg?
It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road
Could i get a name of a business that does port and polishing in Winnipeg?
It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road
corners quicky 1151 fife # 694-3115
competiton engine machine inc 2640 portage st jas # 832-3418
Joe's machine shop 918 elizabeth # 255-8833
Custom crankshaft 125 debaets st boniface # 663-8221
these are a few i know of.
Honestly, if I were you and wanted to go faster, I'd be pricing out an ecotec swap, not a P&P on the 2.2 OHV. You will spend upwards of $800 on a P&P and you won't get anywhere near the bang for the buck you would with a swap. Eco cars are selling at MPI auction for $500 sometimes (and you need the entire fuel system and chassis wiring for the swap), so for the same $$ you'd be well on your way to a better engine/tranny for going fast. I don't mean to discourage, but take a look at the fastest 1/4 mile times in the racing forum and you'll see where the potential lies.
15.3 @ 89.97mph - '01 SFGT
'98 Acura 1.6EL Sport 5M Y7/Y8 mini me
yea ian is right eco sway is the way to go and there is way more aftermarket parts to the eco then the 2.2ohv, u can get a s/c from a coblt ss and some customs parts to mark it work and u'll already have 200 + at the wheel and some other upgrades as well, u can build a good eco for cheaper than what u would with a 2.2 ohv
It takes 8,460 bolts to assemble an automobile, and one nut to scatter it all over the road
