Well this what happend I have a small hole in the line where is the red cirlce and is about needle size hole, I think that when i was putting the header on i probably dented the line a little bit and the time went by the pressure of the power steering made the metal line to crack at the point. any ways I would like to know if i can just replace the line?
I went to autozone and they dont have it they just have the whole rack and pinion assembly, same thing with advanced discount auto parts.
auto zone $130 for the whole assembly and $65 core fee.
discount $160 and $75 core fee.
I dont even need the whole assembly i check everything and its fine. can you guys give me an advice im about to go to the junk yard and pull out the line i want to know if its worth it ah and by the way anyone need any parts from U PULL U PAY IN orlando area let me know ill check on it.
do you have to replace the line? Arent there special (like steel) putties (spell check) out there, like jb weld
When the motor rubbed a hole in my brake line, a family friend got some kind of pipe connector. He cut the hole out and joined it back together with no problems. Was a temporary fix that lasted, and i'm sure is still on the car even now.
Convert 00+ headlights to 95-99
Which line is it? There is 2 in the picture, is it the upper one, or lower one? The upper lookes like it has a plastice sealed connection to the rack, where the lower looks to be a removable type.
FU Tuning
John Higgins wrote:Which line is it? There is 2 in the picture, is it the upper one, or lower one? The upper lookes like it has a plastice sealed connection to the rack, where the lower looks to be a removable type.
i do not beleive the upper line is removable...
quik fix you could split a small piece of fuel hose and wrap it around the pipe . then clmap it on both ends ?? cost you about 3 bucks .
if you arent spraying your just playing !!!
one of the techs @ work said you should be able to depending if ut can get it off . all it does is help the pressure go from one side to another when the boot is compressed... from what he tells meh... GL
5 seconds to find another street...
Thanks to all of you for taking the time and reading everything.
i went to the junk yard decided to pull out the upper one i came off really easy i went to check every cavy they had 2.2l, quad, 2.4l and i decided to pull out 5 lines by the way theres plenty of parts here and full engines with trannys, auto and manual this is at the upullupay orlando.
i will try to put the line one tomorrow ill let u guys know how it came out.
anyways thanks alot for everything guys.
