MARCH 12
well i borrowed a spare compressor that was out at the shop today so i could finally get things started for this years makeover
its not much of a update but atleast i finally got off my ass and started doing @!#$ lol
kidna hard to tell but the hoods just about done
took about 2hrs to sand this little part of spray paint off :cry: NEVER SPRAYPAINT UR CAR IF UR PLANNING ON GETTING A PAINT JOB!!! lol
then i removed the section of my trunk that someone smashed
the tinfoil was layed down to make a mold of that side so i can simply glass that on the otherside...ohh and i had to de-shave my trunk lock so i could get into the trunk(batt. dead) it was a bitch to grind all the welds away lol
then i got a spare dash that i sanded smooth,need to go around acouple edges abit more before paint
should be goin back everyday this week to work on it somemore and hopefully get most of it done by the weekend
MARCH 15
well i got my black interior yesterday(carpet,front/back seats, door panels and armrests 8)
also got a 2.8/3.1 modified timing chain cover for the hybrid motor
and a spare Z24 hood that i tossed on the beater
MARCH 18
thanks guys, a little update
out with the old
in with the new
and a @!#$load of spraypaint removed... the White Z is almost back! lol
MARCH 26....i hate this day lol
HORRIBLY UPDATE
ill let the pictures speak for themselfes
and same @!#$ on part of teh rear quarter panel(all pics form passenger side)
most of the kit off and i think the springs settled more
and i pressurewashed the black carpet
what do u gus think so far?good/bad comments welcome
FDP 62MM TB, FFP Performance Chip, FFP Underdrive Pully, WAI, Hi Flow Cat, 2.5" Catback, Functional Ram Air Hood, Centerforce Dual Friction Clutch
wow thats nice! u didnt primer it before spray painting it? and btw, that blue was spray paint? fooled me, looked good before what color do u plan on painting it next?
-94Custom
http://www.personal.psu.edu/users/a/t/atl126/ricers1.gif
also did u make that hood? if you did, how much would you charge to make another one?
-94Custom
thanks guys
i amde everything on my car
im not sure on a price of my hood but i will have a mold of it soon as i will have a CF version
FDP 62MM TB, FFP Performance Chip, FFP Underdrive Pully, WAI, Hi Flow Cat, 2.5" Catback, Functional Ram Air Hood, Centerforce Dual Friction Clutch
good luck getting carbon fiber. it's nearly impossible right now.
MS Walk April 21 - thanks to those of you who have supported me!
i have rolls of it....well not me but my GFs dad
and hes damn good at it too
FDP 62MM TB, FFP Performance Chip, FFP Underdrive Pully, WAI, Hi Flow Cat, 2.5" Catback, Functional Ram Air Hood, Centerforce Dual Friction Clutch
well damn...looks like you're pretty much set. glad he got it before the shortage.
MS Walk April 21 - thanks to those of you who have supported me!
ahh man... you have to tell me where you got your black interior. i have that style intierior as well, but do you know how hard it is to find those?? I am looking for the pass side vynle door (2door) and the drivers seat just like in your picutre. nice picutres by the way.
**changes are here**
Not to knock your technique.............but it woulda probably been easier than grinding welds to run a couple sets of booster cables to get power long enough to pop the trunk. <best homer simpson DOHHH !>
But damn thats looken good.
Rice.....Part of a balanced Pontiac diet.
thanks guys
ryan i got the interior from a buddys 90Z24 parts car, from all the yards ive been to it is pretty hard to find all black interior,good luck man lol
91 sunbird at the time the car was stuck in my garage as there was a jeep parked behind me with a broken tranny so i would of needed like 4 sets of booster cables lol i can easily weld it back up in minutes so its not a big deal
FDP 62MM TB, FFP Performance Chip, FFP Underdrive Pully, WAI, Hi Flow Cat, 2.5" Catback, Functional Ram Air Hood, Centerforce Dual Friction Clutch
holy bondo on the passenger side! did you know that was there? car must have been in an accident at some point?
i ahd no idea the bondo was there
if i did i would have passed on hte car or not have paid as much as i did for it
FDP 62MM TB, FFP Performance Chip, FFP Underdrive Pully, WAI, Hi Flow Cat, 2.5" Catback, Functional Ram Air Hood, Centerforce Dual Friction Clutch
yeah dude, i dont think ive ever seen so much bondo on one spot in my life...
that sucks
lookin good though man
where is london? You interested in two new doors? No rust, I'm willing to be rid of them for $300 plus delivery....there from a cavalier 2nd gen, I think a 89 Z and a 92 RS. I think they have black interior and they are white. (sitting in storage at my dads) I have pics...Drivers side and passenger side door. Might help be rid of the bondo..
Everything LOUDER than everything else!!
umm thats alittle expensive lol hell i just picked up a 91Z for $200cdn and i can get nice doors for about $75cdn apeice here
thanks for the offer though
FDP 62MM TB, FFP Performance Chip, FFP Underdrive Pully, WAI, Hi Flow Cat, 2.5" Catback, Functional Ram Air Hood, Centerforce Dual Friction Clutch
