ART settings - Suspension and Brake Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
ART settings
Sunday, January 22, 2006 2:20 PM
Hey i just got my ART kit stuck on my cavy, but its really bouncy! What do you guys have your dampening settings at? What psi you ride with? thanks

Re: ART settings
Sunday, January 22, 2006 3:25 PM
I don't have air, but if I remember correctly most ride at about half or more dampening, and around 50 psi... That's completely from memory though.



Re: ART settings
Sunday, January 22, 2006 10:19 PM
the air ride tech struts have 9 different settings on them the way the car rides is the way you adjust the settings on the strut
i drive at 45 psi which give about a 2 inch drop


can i haz bondo
Re: ART settings
Monday, January 23, 2006 8:34 AM
What do you set your front and rear dampening at?
Re: ART settings
Monday, January 23, 2006 9:06 AM
this is something that is total preference. not everyones air ride is the same way. some people like a little softer ride and some like it the opposite. its totally up to you. just set it to the ride height you want and set the damping in the middle. go drive and see how it feels and then adjust accordingly



Re: ART settings
Monday, January 23, 2006 7:15 PM
he is right i like mine at a stiffer ride


can i haz bondo
Re: ART settings
Monday, January 23, 2006 9:14 PM
man it lifts the car up alot, i have so much clearance at like even 100 psi
Re: ART settings
Tuesday, January 24, 2006 4:20 AM
i dont have art but i can imagine the psi would be pretty much typical for any bag system but 100psi is alot. what do you normally ride at?



Re: ART settings
Tuesday, January 24, 2006 8:37 AM
Well so far i've just been mobbin around at like 50 psi. But it max's at 150, never even got it close to that, cause like i said 100 is like way off the ground dude. Pretty sweet really!
Re: ART settings
Tuesday, January 24, 2006 9:22 AM
my max is 150 too w/ the easystreet bags but anything past about 80-90 doesnt make a height difference.



Re: ART settings
Tuesday, January 24, 2006 10:00 AM
Really? I'm not even sure, i havent ever took it higher than 100, its bouncy as a mofo, i'm still @!#$in with my settings, hopefully i'll find a nice medium lol

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search