HELP! After Koni install... - Suspension and Brake Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
HELP! After Koni install...
Friday, June 16, 2006 5:48 AM
I am getting crazy amounts of noise coming from all 4 corners of my car... The install went smoothly, no major problems...

Any ideas? what should i do?

Re: HELP! After Koni install...
Friday, June 16, 2006 6:43 AM
p.s.

the car rides smoothly, its just the noise that's rediculous...

someone please help? I'm thinking I just need new mounts.. .I'm in canada, any idea where to get the Gabrial Mounts or whichever?
Re: HELP! After Koni install...
Friday, June 16, 2006 8:13 AM
wow a little more description maybe? when do the noise occur? what does the noise sound like?



Re: HELP! After Koni install...
Friday, June 16, 2006 8:24 AM
[quote=ßãggéÐÇåv98 (Ûñqùðtäߣè Øñé)]wow a little more description maybe? when do the noise occur? what does the noise sound like?

well, the noises occur pretty much every time i hit a bump... its a big clunking noise with a little bit of high pitch scraping...

Its almost like I didn't put the rubber pieces back into place... but I know i did because i remember loosening the spring compressors too much before i aligned the rubber pads up, so i had to tighten the compressors back up so that i can re-align the rubber
Re: HELP! After Koni install...
Friday, June 16, 2006 10:22 AM
so its a clunk noise whenever you go over bumps? does it sound like its coming from the top inside the strut tower? if so then im 99.9% sure you need new mounts



Re: HELP! After Koni install...
Friday, June 16, 2006 10:51 AM
something is not tightenend down enough.



Re: HELP! After Koni install...
Friday, June 16, 2006 11:04 AM
Agreed - Something is deffinently not tightend down - Check the torque specs and re-check EVERYTHING! it is possible that you need new strut mounts - I have put 3 sets personally in my car - I have been told this is quite common for Cavs and Sunfires in Newfoundland.


Proud member of PreciZion

Re: HELP! After Koni install...
Saturday, June 17, 2006 8:02 AM
M Dawg wrote:p.s.

the car rides smoothly, its just the noise that's rediculous...

someone please help? I'm thinking I just need new mounts.. .I'm in canada, any idea where to get the Gabrial Mounts or whichever?


Try Napa, Part Source or Canadian Tire. They should have them. When I did my suspension I picked up all new mounts from Napa. b/c it was the closest part store.
Re: HELP! After Koni install...
Monday, June 19, 2006 5:41 AM
thanks guys! I appreciate the help It turned out that i needed to tighten up the top strut bolts a bit more - as well as needing new mounts - i got the fronts fixed up now its just the rears.. they aren't so bad.. just a little noise over bumps.. so i figured it could wait 'till Tuesday -- it sucked because this weekend I needed to move into my apartment lol so it was a little difficult not having my car!


thanks for the help guys!
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search