ok, are the studs that come out of the top of the strut tower just studs or are they bolts?
these..
I thought they were just studs and could be turned out to put longer ones in... like these..
or do they unbolt from under in the wheel well?
._____________________________.
Causa latet vis est notissima
DIY Clear 03+ Headlights
no they are studs you can use bolts from the bottom and a bolt it in you need to drill out the stripped stud and get a longer nut and bolt or get new strut mounts
Uh, Time for a new strut mount! Sorry dude but I don't think that can be fixed.
Semper Fi SAINT. May you rest in peace.
I fixed it :-) looks better than it would of before even... too bad it took all day to do lol
._____________________________.
Causa latet vis est notissima
DIY Clear 03+ Headlights
Awesome ! Glad you prooved me wrong.
Semper Fi SAINT. May you rest in peace.
Jackalope wrote:Awesome ! Glad you prooved me wrong.
well, not exactly wrong, I did have to cut off the existing stud, drill it a tad, then use a punch pin to get the old stud out, then put in a threaded retaining clip, and run the bolts in from the top instead of using nuts...
._____________________________.
Causa latet vis est notissima
DIY Clear 03+ Headlights
I stripped mine out too (with a torque wrench!!) I pounded out the stud, stuck a bolt in there and put a litttle weld bead on it to hold it steady. worked great.
Go Go OG Traction!!
I think I would have just bought a new mount lol
Good job on the work though
