Anyone ever found a polyurethane aftermarket bushing that fits the rear axle? The part at the front of the rear wheel wells, where it bolts to the chassis?

I've got the Alero IRS swap already in there... but I'd replace the bushings if there was a stiffer bushing available

IRS? Independent rear suspension?

Yep, he has IRS -- http://www.j-body.org/forums/read.php?f=3&i=91525&t=91525

im wondering the same thing and for this we may have to go to the grand am forums. im going to just buy the whole rear end "kit" if there is one.


farmerz24

it's being discussed here: http://www.j-body.org/forums/read.php?f=3&i=116650&t=116650

looks like TTR is gonna look at making some next year.


Desert Tuners

“When you come across a big kettle of crazy, it’s best not to stir it.”

Not going to be much use unless you've got bushings for there that arm connects to the knuckle.

C.T.S wrote:Not going to be much use unless you've got bushings for there that arm connects to the knuckle.

You mean this bushing ?




yes they are urethane

I will make the front bushing too when i will make my adjustable trailing arm



Location: Montreal, Quebec

C.T.S wrote:Not going to be much use unless you've got bushings for there that arm connects to the knuckle.

You got me... I figured if I could find a J-body rear bushing... I could also find a complete N-body set too But since most people on here have J-bodies... heh....

Anyway.. I know RSM used to sell a complete N-body set with 16 bushings... which for the life of me, I can't figure out the last two... (Three each side in the front - one in the big one, two in the small one... four each side in the rear - two at each end of the trailing arm)... where are the other two??

I wonder where RSM used to get them... Energy? Prothane?

Lenko: I'd be interested in a whole kit too (at a decent price of course). I'd do some digging, let me know if you find anything.
McMoney: I wish I had half the tools and resources you have. Want to sell a complete set?

mcmoney,

where did you get the poly to machine this?


farmerz24

C.T.S wrote:
McMoney: I wish I had half the tools and resources you have. Want to sell a complete set?

Yah it's cool to have cnc machine

I will sell it but I need to test it before

farmerz24

I make the mold




Location: Montreal, Quebec

I contacted Prothane... they only have the front control arm bushings. Not the rear ones I want

McMoney... let me know when you've got sets for sale I've got a hueg N-body market for you to tap into as well!!