Anyone Tubbed there cavi to lay out? - Suspension and Brake Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Anyone Tubbed there cavi to lay out?
Friday, May 18, 2007 4:04 PM
Im looking to start tubbing the rear of my 03 cavi fodo. It hits the front part of the fender constantly. Anyone have pics or ideas on where to start? It looks like I can cut out the front of the fender under the door sill. I dont think it will lay, but will give a couple more inches of room. Im bagged with the easystreet bag over strut setup.

Re: Anyone Tubbed there cavi to lay out?
Saturday, May 19, 2007 10:43 PM
yeah, been looking at ways to do it my self. Only problem is. Mines a daily driver. So if I start cutting, it needs to be finished before I can drive it again.

Your basically going to have to tub the door as well. Doesn't look like there is any other way around it. And you may have to cut the door frame up too. Which will need to be re-braced to support the uni-body structure.

Its a lot of work to do to a four door. 2 doors are cake compared to a 4 door.

Basically if you don't have to drive yours every day, and are good with a welder and bending sheet metal, you should be able to accomplish this. And when you do. Come do mine. lol.

I wish you could just beat the crap outta the inner fender's to make it lay rocker. But yeah. Not gonna happen. lol.




...

Re: Anyone Tubbed there cavi to lay out?
Monday, May 21, 2007 6:16 AM
no offense, but if you arent sure where to start or how to complete this project, it may not be something you should try.

can you weld? can you fabricate sheet metal?





Re: Anyone Tubbed there cavi to lay out?
Monday, May 21, 2007 6:36 AM
yup jeff (20sn22s) is tubbed in the rear and is tucking 22s. lots of custom work involved.



Re: Anyone Tubbed there cavi to lay out?
Monday, May 21, 2007 6:38 PM
They are 2 doors...

He's talking about a 4 door.

Whole different ball game when your tubbing the 4 door. You need to tub the actual door as well as the fenders.




...

Re: Anyone Tubbed there cavi to lay out?
Monday, May 21, 2007 10:39 PM
its not that hard you just have to have the knowledge to do it. i have seen a neon with it done also



Re: Anyone Tubbed there cavi to lay out?
Tuesday, May 22, 2007 3:49 AM
Full Cav Effect (stenger) wrote:They are 2 doors...

He's talking about a 4 door.

Whole different ball game when your tubbing the 4 door. You need to tub the actual door as well as the fenders.


well it usually helps when people use proper grammar such as saying 4 door or 4 dr instead of fodo. its not that hard to type out a whole word.



Re: Anyone Tubbed there cavi to lay out?
Tuesday, May 22, 2007 5:23 AM
Full Cav Effect (stenger) wrote:They are 2 doors...

He's talking about a 4 door.

Whole different ball game when your tubbing the 4 door. You need to tub the actual door as well as the fenders.



exactly, its even harder than doin a 2 door





Re: Anyone Tubbed there cavi to lay out?
Tuesday, May 22, 2007 8:28 AM
extend rear trailing arm approx 2 inches and then worry about tubbing. 1 it'll look better 2 , wont have to tub as much!!!


watch for flying sparks!!!
Re: Anyone Tubbed there cavi to lay out?
Tuesday, May 22, 2007 3:33 PM
StrippedCav98 (Now Quotable) wrote:
Full Cav Effect (stenger) wrote:They are 2 doors...

He's talking about a 4 door.

Whole different ball game when your tubbing the 4 door. You need to tub the actual door as well as the fenders.


well it usually helps when people use proper grammar such as saying 4 door or 4 dr instead of fodo. its not that hard to type out a whole word.


Oh thanks for spending your time to give me an english lesson pal. F U can you figure that out..or you need me to spell it?
Re: Anyone Tubbed there cavi to lay out?
Tuesday, May 22, 2007 3:43 PM
c w wrote:
StrippedCav98 (Now Quotable) wrote:
Full Cav Effect (stenger) wrote:They are 2 doors...

He's talking about a 4 door.

Whole different ball game when your tubbing the 4 door. You need to tub the actual door as well as the fenders.


well it usually helps when people use proper grammar such as saying 4 door or 4 dr instead of fodo. its not that hard to type out a whole word.


Oh thanks for spending your time to give me an english lesson pal. F U can you figure that out..or you need me to spell it?


ROFL (roll on floor laughing)






...


Re: Anyone Tubbed there cavi to lay out?
Tuesday, May 22, 2007 4:28 PM
Full Cav Effect (stenger) wrote:
c w wrote:
StrippedCav98 (Now Quotable) wrote:
Full Cav Effect (stenger) wrote:They are 2 doors...

He's talking about a 4 door.

Whole different ball game when your tubbing the 4 door. You need to tub the actual door as well as the fenders.


well it usually helps when people use proper grammar such as saying 4 door or 4 dr instead of fodo. its not that hard to type out a whole word.


Oh thanks for spending your time to give me an english lesson pal. F U can you figure that out..or you need me to spell it?


ROFL (roll on floor laughing)


There are people on this site who apretiat actual English, not "text English"


Caution: Redneck Posting
Re: Anyone Tubbed there cavi to lay out?
Tuesday, May 22, 2007 5:57 PM
"i funna tub ma fodo"


hahahahaha



Re: Anyone Tubbed there cavi to lay out?
Wednesday, May 23, 2007 11:33 AM
What?


Caution: Redneck Posting
pic042707_6.jpg
Re: Anyone Tubbed there cavi to lay out?
Wednesday, May 23, 2007 1:13 PM
c w wrote:
StrippedCav98 (Now Quotable) wrote:
Full Cav Effect (stenger) wrote:They are 2 doors...

He's talking about a 4 door.

Whole different ball game when your tubbing the 4 door. You need to tub the actual door as well as the fenders.


well it usually helps when people use proper grammar such as saying 4 door or 4 dr instead of fodo. its not that hard to type out a whole word.


Oh thanks for spending your time to give me an english lesson pal. F U can you figure that out..or you need me to spell it?


then dont ask for help if you wanna act like a lil kid



Re: Anyone Tubbed there cavi to lay out?
Wednesday, May 23, 2007 1:17 PM
^^^im w/ u





Re: Anyone Tubbed there cavi to lay out?
Wednesday, May 23, 2007 3:01 PM
oh and before you go and open your mouth i am tubed but im only a 2 door so i guess i couldnt help you



Re: Anyone Tubbed there cavi to lay out?
Wednesday, May 23, 2007 4:59 PM
This thread is funny




...

Re: Anyone Tubbed there cavi to lay out?
Wednesday, May 23, 2007 5:05 PM
Quote:

Oh thanks for spending your time to give me an english lesson pal. F U can you figure that out..or you need me to spell it?

that wont get ya very far around here



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search