Hey sorry for the newb question on the air ride but i bought a kit as a project for me and some neighbors and i am looking for a wiring guide for the switchbox and the setup's that you guys have. any information on this would be helpful thanks.
once again i am sorry for the newbness and dumb questions.
what specifically are you looking for? there are a ton of threads about switchbox wiring. most switch boxes come pre-wired so its really only a matter of matching up the right power wire from the right valve to the wire on the switch box.
what kind of switch box is it., the best way to find out what dose what is hook up the power for the switch box which would be red and go with a test light and hit the switches to see what dose what.
I was gunna get this one when they get it in stock
http://www.suicidedoors.com/air-management/switchboxes/blue-10-switch-box as far as the wiring idk how to wired the valves similar to my friends setup hes got one that levels the car with one switch, one that slams the rear, one that slams the front, each individual wheel, and one to drop the entire car. Im just lookin for as much info as possible. Air ride is something new to me and im taking it step by step.
Thanks
JOE - I have those blue switch boxes available, ready to ship if you want...
I can't quite go that low on a price, but I can get it to you quick. $39, plus shipping. $10 for ground shipping, or $14 for overnight shipping special.
PM, email me, or call if you want to order.
www.TaillightTinting.com #1 SOURCE FOR VHT NITE SHADES
www.aPlusPerformance.com BACK ONLINE SOMETIME SOON!
PHONE 763-682-9945
Joe wrote:I was gunna get this one when they get it in stock http://www.suicidedoors.com/air-management/switchboxes/blue-10-switch-box as far as the wiring idk how to wired the valves similar to my friends setup hes got one that levels the car with one switch, one that slams the rear, one that slams the front, each individual wheel, and one to drop the entire car. Im just lookin for as much info as possible. Air ride is something new to me and im taking it step by step.
Thanks
its pretty simple to wire the valves if you actually think about it. the switch box you are going to get comes prewired so all you have to do is connect the right valves to that wire
you should have the following controls with that box
1 - all up/all down
2 - front up/front down
3 - rear up/rear down
4 - drivers side up/drivers side down
5 - passenger side up/passenger side down
6 - drivers side front up/drivers side front down
7 - passenger side front up/passenger side front down
8 - drivers side rear up/drivers side rear down
9 - passenger side rear up/passenger side rear down
and i cant quite remember what the last one does.
i thought it was see saw but wasnt positive
there would be only 9 wires coming out of the switch box, 4 for inflate 4 for exhaust and 1 for power.
