torq specs for torx - Suspension and Brake Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
torq specs for torx
Tuesday, August 25, 2009 5:20 AM
I need the torq specs for the rear drum assembly bolts, the four torx bolts that hold the drum assembly to the axle, Car is an 2004 sunfire.

Re: torq specs for torx
Tuesday, August 25, 2009 1:51 PM
Iirc its like 50 or so don't quote me. I know its under 100. Its not much I do remember that.



Re: torq specs for torx
Wednesday, August 26, 2009 6:47 AM
my info says 44
Re: torq specs for torx
Wednesday, August 26, 2009 10:36 AM
Thanks a lot
Re: torq specs for torx
Wednesday, August 26, 2009 12:31 PM
No problem. I wish I could remember what it was really. All I did was with the wrench in the nut on the back I just tightened them as tight as I could when I did my neon rear disk swap. No problems at all from it.



Re: torq specs for torx
Wednesday, August 26, 2009 1:14 PM
Yeah I put 04 brakes on my 98 and so I tightened them as tight as they would go, but they other day when I was driving I felt a vibration in the rear end like there was a loose tire, so I got out and check them but it wasn't the tires, the next thing I figured was that it was those bolts, but they were tight as well. but the vibration has since gone away. so no worries I think that it was just mud on the rims, which there was a lot of.
Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search