I've got a 05 Subframe(got it for the 24mm sway bar) I've got it torn down and going to rebuild it to replace my 96' suspension parts.
And get it cleaned up and painted, along with a TTR k-member brace.
I'm looking to replace;
Ball joints
Tie-rods
Sway bar bushings and end links
Control arm bushings
What brands are out there, whats good and whats not?
I've heard some good and bad things about Energy?
Right now its riding on stock 02' struts/shocks, looking to lower it come tax time.
<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -
far as i know nobody has had issues with the prothane (rk sport) control arm bushings when installed correctly.
for tie rods and ball joints moog is pretty much the best. you could get ahold of phil lindsay for some neat heim joint style tie rods if your budget allows.
never heard anything bad about energy stuff... i have their end links on my beretta and they have lasted 15,000 miles so far and went through the utter hell that was last winter so...
Underdog Racing
z yaaaa wrote:far as i know nobody has had issues with the prothane (rk sport) control arm bushings when installed correctly.
for tie rods and ball joints moog is pretty much the best. you could get ahold of phil lindsay for some neat heim joint style tie rods if your budget allows.
never heard anything bad about energy stuff... i have their end links on my beretta and they have lasted 15,000 miles so far and went through the utter hell that was last winter so...
i actually think moog is more than he is for tie rod ends.
i just picked up a set of phils rod ends, very nice. pending install however.
Just realized I put 2 "p" in "suspension" lol
Thanks for the pointers, I'll look into these.
<img src="http://www.majhost.com/gallery/HCAJosh/crap/shooshined.jpg">
- putting the pieces back together -
